Measuring a Melbourne shop for a lease or a fit-out
A shop measure in Melbourne is a plan of the tenancy as it is, for a lease handover or for a fit-out that has not been designed yet. It is not the coloured leasing plan in the brochure, and it is not, by itself, a lettable-area certificate. Arya Designs visits, measures, and draws the tenancy. The service is site measurement in Melbourne.
Every job is issued as DWG and PDF. A call-out fee applies to the visit. We do not publish the amount. Laser scanning is available for a large or complicated tenancy. We do not publish a scan price.
Two different reasons to measure the same shop
A lease record is the shell and the tenancy as handed over: shopfront, walls, depth, amenities, the rear door, and anything the last tenant is leaving behind that the lease should show. The incoming tenant and the landlord both need a file that matches the keys they are exchanging.
A fit-out base is that same tenancy, drawn so a designer or builder can place counters, benches and services. They need openings, the shopfront line, the back-of-house, and the obstructions a brochure leaves out: a column, a bulkhead, a step, a grease trap that is already in the slab. A concept sketch should be checked against those dimensions before anyone orders joinery.
A small example of that second job is the food shop layout for Torito Foods in Carlton: the tenancy was measured, then drawn with the counters and equipment checked against the real dimensions, and issued as DWG and PDF.
If you only need the lettable-area figure for rent, that is a different method. Retail area in centres is often GLA-Retail, not a fit-out floor plan. The rules are in how to measure a retail shop correctly. Say which one you need. A lease handover sometimes needs both the floor plan and an area. They can be scoped together. They are not the same number copied off an old plan.
What the shop drawing should show
For most strip shops, arcade shops and shopping-centre tenancies, the brief includes:
- The shopfront, including a recess or a step at the entry
- The tenancy walls, and whether a side wall is shared
- The sales floor and the back-of-house as separate, labelled rooms
- Doors to the rear lane, the mall, the amenities and any corridor
- Columns, bulkheads and changes in floor level that a fit-out will hit
- Amenities, if they are inside the tenancy
- Services and equipment the brief names and that we can see, such as a cool room, a sink or a switchboard. We do not invent services behind a ceiling
Ceiling heights are included when the brief asks, which a fit-out usually should. Elevations of the shopfront are included when the brief asks. They are not assumed on a simple floor plan. The quote names the sheets.
Who the survey is for, and how to write the brief, is in measured building survey in Melbourne: how to brief one. What a measured building survey hands you in general is in what you get from a measured building survey.
Strip shops, arcades and centres
A strip shop often has a public front and a rear door to a lane. Both belong on the plan if both are part of the tenancy. The rear room is where fit-outs hide the services, and where an evacuation diagram later needs a real exit. Measure it. Do not stop at the shopfront.
An arcade or a centre tenancy is usually accessed through centre management. Say that in the brief, including whether we can attend only outside trading hours. A centre's standard tenancy outline is a start. It is not a substitute for measuring the shop after the last fit-out.
A trading shop can stay furnished. We measure around counters and stock. A locked store or a cool room that is in the brief has to be opened, or that room is noted as not accessed.
How long it takes, and the files
The visit is booked after the free quote. The quote names the scope, the method and the timing. After a straightforward shop visit, drawing time is typically 1–3 business days. A larger tenancy, a centre that limits access, or a laser scan takes longer. We confirm that in the quote. We do not treat it as a guaranteed number of days.
You receive DWG and PDF either way. The PDF is the copy for the lease pack and the designer. The DWG is the file they edit. Both are always included. Why both are issued is in PDF versus DWG.
What people order next
The shop plan is the base. Later drawings stay separate:
- A workplace evacuation diagram of the finished tenancy, if the handover asks for one, on fire evacuation plans. The fee and the six-hour turnaround are published on that page. What to put in the handover pack is in evacuation diagram for a lease or fit-out handover.
- A liquor licence redline, if the shop is a venue and the plans are usable: $499 flat, 48 hours, DWG and PDF, on redline plans.
- Fit-out or permit drawings, quoted on their own from the measured plan.
The survey does not define the title boundary, and it does not replace a feature and level survey. If the landlord has asked for the land, we will say so. The difference is in measured building survey versus a feature and level survey.
Send the shop address, the centre or strip, and whether the drawing is a lease record or a fit-out base, through site measurements. Choose Site Measure on the quote form.
Send the shop address and whether the drawing is for a lease record or a fit-out. The quote is free. A call-out fee applies. You receive DWG and PDF.
Upload Your Plans & Get a Quote in 24 Hours
Professional drafting for builders and renovators across Australia. Fixed pricing, fast turnaround.
